RECEIVER HITCHES 2"
DESCRIPTION |
MAX RATING |
PART NUMBER |
| Chevy Pickup 62-87 | 12000 lbs. |
034 |
| Chevy Pickup 88-98 | 12000 lbs. |
036 |
| Chevy Van 78-98 | 10000 lbs. |
016 |
| Chevy Blazer and Suburban 92-98 | 10000 lbs. |
063 |
| Dodge Pickup 73-97 | 12000 lbs. |
038 |
| Dodge Van 78-98 | 10000 lbs. |
039 |
| Ford Pickup OS 73-97 | 12000 lbs. |
038 |
| Ford Pickup NS | 10000 lbs. |
078 |
| Ford Van 75-91 | 10000 lbs. |
014 |
| Ford Van 95-98 | 10000 lbs. |
061 |
| Ford Explorer | 10000 lbs. |
052 |
HITCH ACCESSORIES
Designed to fit all 2" receiver hitches, including Reese, Quality, Drawtite, Super Hitch, Valley, and Etc. These can be used in the up or down position.
BALL MOUNTS
| DESCRIPTION | HOLE SIZE |
CAPACITY |
PART NUMBER |
 |
| 2" Drop | 1" |
5000 lbs. |
UB208 |
|
| 4" Drop | 1" |
5000 lbs. |
UB409 |
|
| 6" Drop | 1" |
5000 lbs. |
UB612 |
|
| 8" Drop | 1" |
5000 lbs. |
R-21198 |
CLEVIS MOUNT
| DESCRIPTION | CAPACITY |
PART NUMBER |
 |
| Clevis Mount with 1" Hole | 6000 lbs. |
DT-5764 |
PINTLE MOUNTS
Designed to fit most pintle hooks
| DESCRIPTION | A |
B |
# OF MOUNT POSITIONS |
PART NUMBER |
 |
| Short Pintle Mount | 8 1/2" |
7 1/4" |
3 |
PM-87 |
|
| Tall Pintle Moune | 12 1/2" |
13" |
6 |
PM-812 |
WEIGHT DISTRIBUTING HITCH
This hitch is designed to take heavy tounge loads off your vehicle. All parts commonly needed are included in the kit. The hitch head is fully adjustable and an optional sway control is available.
DRAWING NUMBER |
DESCRIPTION |
PART NUMBER |
Complete Weight Distributing Kit |
1000A |
|
1 |
Adj. Ball Mount Assembly |
6007C |
2 |
Spring Bar Assembly |
5005C |
3 |
Snap Up Bracket Assembly |
5002C |
SWAY CONTROL
DRAWING NUMBER |
DESCRIPTION |
PART NUMBER |
Complete Kit - Contains all needed parts. |
062 |
|
1 |
Tounge Mount with Ball |
6033 |
2 |
Weld on Mounting Plate for Ball Mount |
6037 |
3 |
Threaded Ball for Hitch Side |
6032 |
 |
HITCH BALLS |
 |
| SIZE | SHANK DIAMETER | RATING | FINISH | PART NUMBER | |
| 1 7/8" | 3/4" | 2000 lbs. | Chrome | C-1 |  |
| 1 7/8" | 1" | 2000 lbs. | Chrome | C-3 | |
| 2" | 3/4" | 2500 lbs. | Chrome | C-2 | |
| 2" | 1" | 5000 lbs. | Chrome | C-4 | |
| 2 5/16" | 1" | 6000 lbs. | Zinc | 18 | |
| 2 5/16" | 1 1/4" | 10000 lbs. | Zinc | 19 | |
| 2 5/16" | 1 1/4" | 30000 lbs. | Black | SB312 |
EXTRA LONG SHANK HITCH BALLS
The longer shank is used on some factory bumpers.
SIZE |
SHANK DIAMETER |
RATING |
FINISH |
PART NUMBER |
 |
1 7/8" |
3/4" |
2000 lbs. |
Chrome |
10XLS |
|
2" |
3/4" |
2000 lbs. |
Chrome |
4XLS |
CONVERT A BALL
The simplest way to switch ball sizes.
| DESCRIPTION | PART NUMBER |
 |
| Kit includes 1" Shank with 1 7/8" & 2" Ball | B901P |
|
| Kit includes 1" shank with 1 7/8", 2", and 2 5/16" Ball | B900P |
|
| 1 7/8" Ball No Shank | B300P |
|
| 2" Ball No Shank | B400P |
|
| 2 5/16" Ball No Shank | B600P |
REDUCER BUSHINGS
| DESCRIPTION | PART NUMBER |
|
| Reduces 1" Hole to 3/4" | 200 |
 |
| Reduces 1 1/4" Hole to 1" | 5014 |
|
| Reduces 1 3/8" Hole to 1 1/4" | 5016 |
HITCH PINS
5/8" pin designed for use in all 2" square receiver hitches
| DESCRIPTION | PART NUMBER |
 |
| 5/8" Pin and Clip | HP1020 |
|
| 5/8" Pin and Lock | BLHP200 |
RECEIVER TUBING
2" square tubing with collar and 5/8" hole as used on most
receiver hitches.
| DESCRIPTION | PART NUMBER | |
| 6" Long Tube | P625 |  |
| 12" Long Tube | P1225 | |
| 24" Long Tube | P2425 |
RECEIVER TUBE BRUSH
Square brush used to remove rust in standard 2" receiver tubes.
| DESCRIPTION | PART NUMBER |  |
| 2" Brush | RTB-2 |
